Eyes safety is more than merely preventing injuries because they can shield from UV rays and other foreign particles that can cause short or long-term vision damage.
On any job site, Children Safety Glasses, the primary objective is safety. There are some worksite that needs insulator gloves like when dealing with electricity.
But they forget to take an additional step of security to wear safety glasses. The lack of protective eyewear leads to serious eye injuries like complete blindness as well.
If any worker is suffering an eye injury, it is because of not wearing proper protection at all.
People don’t realize the value of eye safety at the job site. Potential threats can be avoided by wearing appropriate protective eyeglasses.
How Can You Recognize Safety Glasses?
Lenses should be certified, and they must meet the safety criteria for impact resistance. Allow those devices to be made with approved material.
Marking should be applied by all manufacturers, and it should be present on all certified frames, lenses, side shields, and other many parts of spectacles, goggles, and helmets.
Frames of protective eyeglasses are more impacted than regular frames because they are heat resistant. Besides, they are designed to prevent lenses from pushing into the eyes.
What should you know about the care and fit of safety eyewear?
Eyeglasses will safeguard your eyes. If your eyes are covered by the safety eyewear, no injury will occur.
If eye safety is needed, establish a safety eyewear corporate program for training, selection, fitting, and maintenance.
Fit:
Make sure your safety glasses have a great fit and have covered eyebrows to cheekbones, from bony nose area to face and eyes outside area. Temple length, bridge size, and eye size all vary.
Eyeglasses should be assigned individually fitted so that the gaps between the face and device edges are minimal. Spectacles should fit the comfortable temples and over the area.
They should be very close to the face along the nose bridge. Wearers should see clearly in all directions without any barrier in the field of view.
Care:
- Protective devices for the eye and face require maintenance.
- Clean your protective gadgets daily and follow the maker’s instructions.
- Don’t roughly use them because you can protect them from scratches. Scratches can damage vision and deteriorate lenses.
- Place your devices in a dry and clean place where they don’t fall.
- Store them in the hard case when they are not in use.
- Immediately replace pitted, ill-fitting, or scratched eyewear because damaged eyeglasses can interfere with vision and cannot provide proper protection.
- Replace defective parts with identical parts from original makers to ensure safety.
- Don’t modify the safety devices.
What Should You Know about Lens Tints?
Eyeglasses lenses are available in different types like tinted, clear, polarized, and photochromic, and each lens provides different protection levels from UV radiation. Even some tinted lenses offer no protection.
So, the Importance of Wearing Safety Glasses is not to become fooled by the shades of lenses. Below here are some reasons that will explain why you should wear safety glasses:
Corneal Burns:
The UV radiations and UV rays produced by electrical arcs are a grave threat to your eyes. As you know all welders wear safety lenses to shield their eyes from corneal burns that are generated by the electric arc that they are using.
For this reason, an electrician should wear protective glasses for eye protection at their workplace. If you work with live circuits, safety eyewear is essential to wear specific shaded lenses for vision protection.
Chemical Irritants:
On the electrical worksite, an electrician has to work with the corrosive chemicals that can damage your vision as well. Besides material, the devices they use at their worksite are also dangerous for the eyes.
For example, if an electrician is working on a construction site, he might face chemical agents, dust, paint fumes, and many more things that are a great treat for the eyes.
OSHA Requirements:
OSHA has strict requirements when you are in contact with a dangerous work area. One essential point is that you must wear protective glasses when you are in a working place.
In the case of an OSHA inspector visit your job site, and if you are not wearing proper protective goggles, you can face severe penalties and fines.
The safety eyewear is essential because you can avoid eye injuries by wearing protective gear.
Replacing Regular Glasses:
If you wear regular safety eyewear, you must replace them with certified protective eyeglasses. Standard eyewear is hazardous to use at your risky workplace.
Even you can buy insulated protective eyewear for the covering of prescription glasses or buy prescription protective eyewear.
